Power Equipment

We have available a R+D team to to develop, design and produce custom cabinets. Furthermore, we have a standard wide range of power factor correction devices with resonance filter to improve the quality from your network and remove a possible reactive surcharge.
Check it at poweralia.com!

The range of 3-phase AC/AC converters SC-ACP is made from very compact power stack design in W3.2C configuration especially designed for operate with heating power resistors. This equipment permits operates in proportional/burst-mode operation avoiding mains disturbances with standard input signal level for power reference (Potentiometer, 0-10 V and 4-20 mA). Besides, the power stack includes thermal protection by means of internal thermal switch and automatic disconnection, status LEDs for monitorization, overtemp fault available through relay, etc. 

Highlights:
  • Three phase installations LV up to 50 kW
  • Mains: 230/400/440 VAC / 50-60 Hz
  • Very compact design
  • Multiple input signal levels
  • Thermal protection with thermal switch
  • Fault relay NC
SC-ACP Series
Related downloads

The range of 3-phase AC/AC converters SC-ACR is made from compact power stack design in W3C configuration with the regulation board SC6006. This equipment permits several modes of operation and almost any standard input signal level for power reference (Potentiometer, 0-5 V, 0-10 V and 4-20 mA). Besides, the power stack inclues phase rotation protection, ultra fast fuses included, thermal protectin by means of internal thermal switch, LCD screen and LEDs for status and monitorization, external fault available through relay, etc.

Highlights:
  • Three phase installations LV up to 250 kW
  • Mains: 230/400/480 VAC / 50-60 Hz
  • Modular and stackable
  • Ultrafast protection fuses included
  • Multiple operation modes
  • Multiple input signal levels
  • Phase rotation protection
  • Thermal protection with thermal switch
  • Fault relay NC/NO
SC-ACR
Related downloads

The SC-PFC series consists of capacitor banks with static contactors (thyristors) and reactance. These equipments allow a quick reactive compensation and are very suitable for fast and/or dynamic loads (welding, CNC, elevators, air conditioning, offices, etc). Furthermore, by incorporating reactors in series can compensate reactive power in networks with high harmonic content, where there is a risk of resonance, blocking the injection of harmonics to capacitor and avoiding risks of overcurrent and overvoltage by resonances. The connection and disconnection of capacitor banks is produced when the current crosses zero in each phase. In this way damaging spikes and transients for capacitors are avoided. Highlights:
  • Three phase installations LV < 300 kW
  • A range between 20-120 kVAr 400 V
  • Modular and stackable
  • Harmonic measurements
  • 3 current transformer included
  • Solid-state technology
  • Main switch incorporated
  • IP54
SC-ACR Series
Related downloads
Power Equipment
Semicode offers high-end power equipment. SC-PFC is a range of power factor cabinets designed to be very scalable and aimed to help to improve the quality of the grid whilst reducing the electrical bill. SC-ACR is a range of AC/AC ready-to-use converters capable of managing up to 250 kW.
Quick and easy commissioning
All the power equipment from Semicode is mainly characterized by its easy installation and use. The cabinets and all our equipment have been pre-configured and tested at the factory. The whole range of power equipment SC-PFC and SC-ACR also features a wide space for wiring the power and control connections which are designed to facilitate the equipment installation and its maintenance.
Embedded Controller
For SC-PFC series its controller is suitable for reactive power correction and the use of static contactors. It also offers the advantage of being able to add expansion modules to provide more services. For SC-ACR series the main controller is a SC6006 SCR regulation board which is highly configurable and customizable. For each case the integrated controller is set and tested in factory in order to provide to our clients a plug-and-play power converter.
  • Do you need more information about this range of product?Contact us